Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:soft_installation_de_gate_3.1.2_installation_sous_sl4_32_ou_64_bits [2016/12/16 10:16] (current)
Line 1: Line 1:
 +Last modified: Sep 01, 2008 by Calas\\
 +\\
 +
 +====== SOFT: Gate 3.1.2 installation with SL4 32 ou 64 bits ======
 +
 +\\
 +\\
 +
 +=====  Installation requirements ​ =====
 +
 +- download CLHEP, ROOT, GEANT, ECAT7, LMF et GATE\\
 +- linux SL4 32 bits\\
 +- linux SL4 64 bits\\
 +- gcc version 3.4.6
 +=====  Download tar file  =====
 +
 +
 +====  Create a repository corresponding to the gate version ​ ====
 +
 +<​code>​
 +> mkdir /​scratch/​gate/​gate_v3.1.2
 +> mkdir /​scratch/​gate/​gate_v3.1.2/​src
 +</​code>​
 +
 +====  Downlaod ROOT version root 5.14  ====
 +
 +http://​root.cern.ch/​root/​Version512.html
 +<​code>​
 +> cd /​usr/​local/​gate/​gate_v3.1.2
 +> wget ftp://​root.cern.ch/​root/​root_v5.14.00h.source.tar.gz
 + -O /​scratch/​gate/​gate_v3.1.2/​src/​root_v5.14.00h.source.tar.gz
 +</​code>​
 +
 +====  Downlaod CLHEP version 2.0.3.1 ​ ====
 +
 +http://​proj-clhep.web.cern.ch/​proj-clhep/​DISTRIBUTION/​clhep.html
 +<​code>​
 +> wget http://​proj-clhep.web.cern.ch/​proj-clhep/​DISTRIBUTION/​distributions/​clhep-2.0.3.1.tgz -O /​scratch/​gate/​gate_v3.1.2/​src/​clhep-2.0.3.1.tgz
 +</​code>​
 +
 +====  Download LMF version 3.0  ====
 +
 +http://​opengatecollaboration.healthgrid.org/​GATEusers/​download.php?​doc=lmf_v3.0.tar.gz
 +<​code>​
 +> wget "​http://​opengatecollaboration.healthgrid.org/​GATEusers/​download.php?​doc=lmf_v3.0.tar.gz"​ -O /​scratch/​gate/​gate_v3.1.2/​src/​lmf_v3.0.tar.gz
 +</​code>​
 +
 +====  Download ECAT  ====
 +
 +http://​stir.hammersmithimanet.com
 +<​code>​
 +> wget "​http://​opengatecollaboration.healthgrid.org/​GATEusers/​download.php?​doc=ecat.tar.gz"​ -O /​scratch/​gate/​gate_v3.1.2/​src/​ecat.tar.gz
 +</​code>​
 +
 +====  Download GEANT version 4 9.0.p01 ​ ====
 +
 +http://​geant4.web.cern.ch/​geant4/​support/​source_archive.shtml
 +<​code>​
 +> wget http://​geant4.web.cern.ch/​geant4/​support/​source/​geant4.9.0.p01.gtar.gz -O /​scratch/​gate/​gate_v3.1.2/​src/​geant4.9.0.p01.gtar.gz
 +> wget http://​geant4.web.cern.ch/​geant4/​support/​source/​G4NDL.3.11.tar.gz -O /​scratch/​gate/​gate_v3.1.2/​src/​G4NDL.3.11.tar.gz ​
 +> wget http://​geant4.web.cern.ch/​geant4/​support/​source/​G4NDL.0.2.tar.gz -O /​scratch/​gate/​gate_v3.1.2/​src/​G4NDL.0.2.tar.gz ​
 +> wget http://​geant4.web.cern.ch/​geant4/​support/​source/​G4EMLOW.4.3.tar.gz -O /​scratch/​gate/​gate_v3.1.2/​src/​G4EMLOW.4.3.tar.gz ​
 +> wget http://​geant4.web.cern.ch/​geant4/​support/​source/​PhotonEvaporation.2.0.tar.gz -O /​scratch/​gate/​gate_v3.1.2/​src/​PhotonEvaporation.2.0.tar.gz ​
 +> wget http://​geant4.web.cern.ch/​geant4/​support/​source/​G4RadioactiveDecay.3.2.tar.gz -O /​scratch/​gate/​gate_v3.1.2/​src/​G4RadioactiveDecay.3.2.tar.gz ​
 +> wget http://​geant4.web.cern.ch/​geant4/​support/​source/​patch_geant4.9.0.p01.tar.gz -O /​scratch/​gate/​gate_v3.1.2/​src/​patch_geant4.9.0.p01.tar.gz
 +</​code>​
 +
 +====  Download GATE 3.1.2  ====
 +
 +http://​www-lphe.epfl.ch/​~PET/​research/​gate/​GATEregisteredUsers/​download_index.php
 +<​code>​
 +> wget "​http://​opengatecollaboration.healthgrid.org/​GATEusers/​download.php?​doc=gate_v3.1.2.tar.gz"​ -O /​scratch/​gate/​gate_v3.1.2/​src/​gate_v3.1.2.tar.gz
 +</​code>​
 +=====  Untar tgz files  =====
 +
 +<​code>​
 +> cd /​scratch/​gate/​gate_v3.1.2/​src
 +
 +> tar xvfzC root_v5.14.00h.source.tar.gz /​scratch/​gate/​gate_v3.1.2
 +> mv /​scratch/​gate/​gate_v3.1.2/​root /​scratch/​gate/​gate_v3.1.2/​root_v5.14.00h ​
 +>
 +> tar xvfzC clhep-2.0.3.1.tgz /​scratch/​gate/​gate_v3.1.2
 +
 +> tar xvfzC lmf_v3.0.tar.gz /​scratch/​gate/​gate_v3.1.2
 +
 +> mkdir /​scratch/​gate/​gate_v3.1.2/​ecat
 +> tar xvfzC ecat.tar.gz /​scratch/​gate/​gate_v3.1.2/​ecat
 +>
 +> tar xvfzC geant4.9.0.p01.gtar.gz /​usr/​local/​gate/​gate_v3.1.2
 +> tar xvfzC G4NDL.3.11.tar.gz /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01 ​
 +> tar xvfzC G4NDL.0.2.tar.gz /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01
 +> tar xvfzC G4EMLOW.4.3.tar.gz /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01
 +> tar xvfzC PhotonEvaporation.2.0.tar.gz /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01
 +> tar xvfzC G4RadioactiveDecay.3.2.tar.gz /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01
 +> tar xvfzC patch_geant4.9.0.p01.tar.gz /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01
 +>
 +> tar xvfzC gate_v3.1.2.tar.gz /​usr/​local/​gate/​gate_v3.1.2
 +</​code>​
 +=====  CLHEP Installation ​ =====
 +
 +<​code>​
 +> cd /​scratch/​gate/​gate_v3.1.2/​2.0.3.1/​CLHEP
 +> ./configure --prefix=/​usr/​local/​gate/​gate_v3.1.2/​CLHEP-2.0.3.1
 +> make
 +> make install
 +</​code>​
 +=====  ROOT installation ​ =====
 +
 +
 +====  For SL4 32 bits:  ====
 +
 +<​code>​
 +> cd /​scratch/​gate/​gate_v3.1.2/​root_v5.14.00h
 +> ./configure linux --with-opengl-incdir=/​usr/​include --with-opengl-libdir=/​usr/​lib --with-cern-libdir=/​afs/​in2p3.fr/​cernlib/​ia32_sl4/​2005/​lib --with-pythia6-libdir=/​usr/​local/​pythia --with-shift-libdir=/​usr/​local/​lib --enable-pgsql --enable-minuit2
 +--enable-mathcore --enable-mathmore --enable-reflex --enable-cintex --enable-roofit --enable-table --enable-xrootd --enable-explicitlink --disable-shared --disable-globus --disable-castor --disable-clarens --with-afs=/​usr/​afsws
 +
 +> make
 +> setenv ROOTSYS /​usr/​local/​gate/​gate_v3.1.2/​root_v5.14.00h/​root
 +> make install
 +</​code>​
 +
 +====  For SL4 64 bits:  ====
 +
 +Modify the file $ROOTSYS/​config/​Makefile.config:​
 + ​XPMLIB := /​usr/​X11R6/​lib64/​libXpm.so
 + ​ASEXTRALIB := /​usr/​lib64/​libjpeg.so /​usr/​lib64/​libtiff.so /​usr/​lib64/​libungif.so /​usr/​lib64/​libpng.so /​usr/​lib64/​libz.so
 +
 +<​code>​
 +> ./configure linuxx8664gcc --with-opengl-incdir=/​usr/​include --with-clhep-incdir=/​usr/​local/​lhcxx/​CLHEP/​pro/​sl4_amd64_gcc346/​include --with-opengl-libdir=/​usr/​lib --with-cern-libdir=/​afs/​in2p3.fr/​cernlib/​amd64_sl4/​2005/​slc4_amd64_gcc34/​lib
 +--with-shift-libdir=/​usr/​local/​lib --enable-pgsql --enable-minuit2 --enable-mathcore --enable-mathmore --enable-reflex --enable-cintex --enable-roofit --enable-table --enable-xrootd --enable-explicitlink --disable-shared --disable-globus --disable-castor
 +--disable-clarens --with-afs=/​usr/​afsws
 +> make
 +> setenv ROOTSYS /​usr/​local/​gate/​gate_v3.1.2/​root_v5.14.00h/​root
 +> make install
 +</​code>​
 +=====  LMF installation ​ =====
 +
 +<​code>​
 +#/bin/csh
 +
 +cd /​scratch/​gate/​gate_v3.1.2/​lmf_v3.0
 +setenv PATH /​usr/​local/​gate/​gate_v3.1.2/​root_v5.14.00h/​bin:​${PATH}
 +
 +./configure
 +</​code>​
 +Modify the makefile by adding:
 + ​INCLUDE = -I./​includes/​ -I${ROOTSYS}/​include
 +
 +<​code>​
 +make clean
 +make
 +cd examples ​
 +make clean
 +make
 +
 +rm -rf /​usr/​local/​gate/​gate_v3.1.2/​lmf_v3.0/​
 +mkdir /​usr/​local/​gate/​gate_v3.1.2/​lmf_v3.0
 +
 +cd ..
 +
 +cp -r lib  /​usr/​local/​gate/​gate_v3.1.2/​lmf_v3.0/​
 +cp -r examples ​ /​usr/​local/​gate/​gate_v3.1.2/​lmf_v3.0/​
 +cp -r includes ​ /​usr/​local/​gate/​gate_v3.1.2/​lmf_v3.0/​
 +</​code>​
 +=====  ECAT installation ​ =====
 +
 +<​code>​
 +> cd /​scratch/​gate/​gate_v3.1.2/​ecat
 +> make -f Makefile.unix
 +> rm *.o
 +> mkdir /​usr/​local/​gate/​gate_v3.1.2/​ECAT
 +> mkdir /​usr/​local/​gate/​gate_v3.1.2/​ECAT/​lib
 +> mkdir /​usr/​local/​gate/​gate_v3.1.2/​ECAT/​lib/​Linux-g++
 +> mkdir /​usr/​local/​gate/​gate_v3.1.2/​ECAT/​include
 +
 +> cp /​scratch/​gate/​gate_v3.1.2/​ecat/​matrix.h /​scratch/​gate/​gate_v3.1.2/​ecat/​machine_indep.h /​usr/​local/​gate/​gate_v3.1.2/​ECAT/​include/​
 +> cp /​scratch/​gate/​gate_v3.1.2/​ecat/​libecat.a /​usr/​local/​gate/​gate_v3.1.2/​ECAT/​lib/​Linux-g++
 +</​code>​
 +=====  GEANT4 installation ​ =====
 +
 +If the installion of geant is stopped, execute the following command:
 +<​code>​
 +> rm -rf /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01
 +</​code>​
 +and redo the untar. ​
 +====  GEANT installation setup  ====
 +
 +For SL4 64 bits, you have to modify the file G4INSTAL/​config/​sys/​Linux-g++.gmk:​
 + ​X11LIBS := -L/​usr/​X11R6/​lib64 -lXmu -lXt -lXext -lX11 -lSM -lICE
 + ​OGLLIBS := -L$(OGLHOME)/​lib64 -lGLU -lGL
 +
 +<​code>​
 +> setenv ROOTSYS /​usr/​local/​gate/​gate_v3.1.2/​root_v5.14.00h/​root
 +> cd /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01 ​
 +> ./Configure -build
 +
 +[Type carriage return to continue]
 +[Type carriage return to continue]
 +[Type carriage return to continue]
 +
 +Definition of G4SYSTEM variable is Linux-g++.
 +That stands for:
 +1) OS           : Linux
 +2) Compiler ​    : g++
 +
 +To modify default settings, select number above (e.g. 2) 
 +[Press [Enter] for default settings] ​
 + 
 +I can set things up so that your shell scripts and binaries are more portable,
 +at what may be a noticable cost in performance. ​ In particular, if you
 +ask to be portable, the following happens:
 +
 +     1) Shell scripts will rely on the PATH variable rather than using
 +        the paths derived above.
 +     2) ~username interpretations will be done at run time rather than
 +        by Configure.
 +
 +Do you expect to run these scripts and binaries on multiple machines? ​
 +[n] n 
 +
 +Where is Geant4 installed? ​ [/​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01] ​
 +
 +Specify the path where Geant4 libraries and source files should be
 +installed. ​
 +/​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01 ] 
 +
 +Do you want to copy all Geant4 headers in one directory? ​
 +[y] y 
 + 
 +Please, specify default directory where ALL the Geant4 data is installed:
 +G4LEVELGAMMADATA:​ /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​data/​PhotonEvaporation2.0
 +G4RADIOACTIVEDATA:​ /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​data/​RadioactiveDecay3.2
 +G4LEDATA: /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​data/​G4EMLOW4.3 G4NEUTRONHPDATA:​ /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​data/​G4NDL3.11
 +You will be asked about customizing these next. 
 +[/​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​data] /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01
 +
 +Please, specify directories where the Geant4 data is installed:
 +
 +1) G4LEVELGAMMADATA:​ /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​PhotonEvaporation2.0
 +2) G4RADIOACTIVEDATA:​ /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​RadioactiveDecay3.2
 +3) G4LEDATA: /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​G4EMLOW4.3
 +4)G4NEUTRONHPDATA:​ /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​G4NDL3.11
 +
 +
 +To modify default settings, select number above (e.g. 2) 
 +[Press [Enter] for default settings] ​
 +
 +Please, specify where CLHEP is installed (set by default):
 +
 +CLHEP_BASE_DIR: ​                /​usr/​local/​gate/​gate_v3.1.2/​CLHEP-2.0.3.1
 +
 +According to it will be set:
 +CLHEP_INCLUDE_DIR
 +CLHEP_LIB_DIR
 +
 +You will be asked about customizing these next. 
 +[/​usr/​local]/​usr/​local/​gate/ ​
 +
 +You can customize paths of you CLHEP installation:​
 +
 +1) CLHEP_INCLUDE_DIR: ​     /​usr/​local/​gate/​gate_v3.1.2/​CLHEP-2.0.2.3/​include
 +2) CLHEP_LIB_DIR: ​         /​usr/​local/​gate/​gate_v3.1.2/​CLHEP-2.0.2.3/​lib
 +3) CLHEP_LIB: ​             CLHEP
 +
 +To modify default settings, select number above (e.g. 2) 
 +[Press [Enter] for default settings] ​
 +
 +
 +By default '​static'​ (.a) libraries are built.
 +
 +
 +Do you want to build '​shared'​ (.so) libraries?​[n] y
 +You selected to build '​shared'​ (.so) libraries. ​
 +
 +Do you want to build '​static'​ (.a) libraries too?[n] y 
 + 
 +Do you want to build '​global'​ compound libraries? [n] y 
 +
 +
 +Granular libraries are used by defaults, you asked to build global
 +compound libraries. Do you want to build '​granular'​ libraries too?
 +[n] n
 +
 +Do you want to compile libraries in DEBUG mode (-g)? [n] n 
 +
 +  G4UI_NONE
 +
 +If this variable is set, no UI sessions nor any UI libraries are built. ​
 +This can be useful when running a pure batch job or in a user framework ​
 +having its own UI system.
 +Do you want to set this variable ?[n] n
 +
 +  G4UI_BUILD_XAW_SESSION
 +  G4UI_USE_XAW
 +
 +  Specifies to include and use the XAW interfaces in the
 +  application to be built.
 +  The XAW (X11 Athena Widget set) extensions are required to activate ​
 +  and build this driver.
 +[n] n 
 +
 +  G4UI_BUILD_XM_SESSION
 +  G4UI_USE_XM
 +
 +  Specifies to include and use the XM Motif based user interfaces.
 +  The XM Motif extensions are required to activate and build this
 +  driver.
 +[n] n
 +
 +G4VIS_NONE
 +
 +If this variable is set, no visualization drivers will be built or used.
 +Do you want to set this variable ?
 +[n] n 
 +
 +G4VIS_BUILD_OPENGLX_DRIVER
 +G4VIS_USE_OPENGLX
 +
 +It is an interface to the de facto standard 3D graphics library,
 +OpenGL. It is well suited for real-time fast visualization
 +and prototyping. The X11 version of the OpenGL libraries is
 +required.
 +[n] y 
 +
 +G4VIS_BUILD_OPENGLXM_DRIVER
 +G4VIS_USE_OPENGLXM
 +
 +It is an interface to the de facto standard 3D graphics library,
 +OpenGL. It is well suited for real-time fast visualization
 +and prototyping. The X11 version of the OpenGL libraries and 
 +the Motif Xm extension is required.
 +[n] n
 +
 +G4VIS_BUILD_DAWN_DRIVER
 +G4VIS_USE_DAWN
 +
 +DAWN drivers are interfaces to the Fukui Renderer DAWN. DAWN is
 +a vectorized 3D PostScript processor suited to prepare technical
 +high quality outputs for presentation and/or documentation.
 +[n] n
 +
 +G4VIS_BUILD_OIX_DRIVER
 +G4VIS_USE_OIX
 +
 +This driver is based on the "​Hepvis"​ class library.
 +The OpenInventor driver and the Hepvis class library are based
 +on OpenInventor technology for scientific visualization.
 +The X11 version of OpenInventor is required.
 +[n] n
 +
 +G4VIS_BUILD_RAYTRACERX_DRIVER
 +G4VIS_USE_RAYTRACERX
 +
 +Allows for interactive ray-tracing graphics through X11.
 +The X11 package is required.
 +[n] n
 +
 +G4VIS_BUILD_VRML_DRIVER
 +G4VIS_USE_VRML
 +
 +These driver generate VRML files, which describe 3D scenes to be 
 +visualized with a proper VRML viewer.
 +[n] n
 +
 +OGLHOME/​include
 +OGLHOME/lib
 +
 +You have selected to use OpenGL driver.
 +Specify the correct path (OGLHOME) where OpenGL is installed in your system.
 +It was found in: 
 +[/​usr] ​
 +
 +G4LIB_BUILD_G3TOG4  ​
 +
 +If this variable is set, it will be built G3TOG4 module.
 +Do you want to set this variable ?
 +[n] n
 + 
 +G4LIB_BUILD_ZLIB  ​
 +
 +Do you wish to activate compression for output files generated
 +through the HepRep visualization driver ?
 +[n] n
 +
 +G4ANALYSIS_USE
 +
 +Activates the configuration setup for allowing plugins to
 +analysis tools based on AIDA (Astract Interfaces for Data
 +Analysis). In order to use AIDA features and compliant analysis
 +tools, the proper environment for these tools will have to be
 +set (see documentation for the specific analysis tools).
 +[n]n 
 + 
 +End of configuration phase.
 + 
 +Creating configuration setup file...
 +
 +WARNING: the generated configuration file
 +can be edited if necessary!
 +You can introduce any change to the configuration file
 +/​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​.config/​bin/​Linux-g++/​config.sh before the final installation. ​
 +To do so, use a shell escape now (e.g. !vi /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​.config/​bin/​Linux-g++/​config.sh).
 +
 +Press [Enter] to start installation or use a shell escape to edit config.sh: ​
 +</​code>​
 +<​code>​
 +> more  /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​.config/​bin/​Linux-g++/​g4make.log ​
 +</​code>​
 +Finish installation with:
 +<​code>​
 +> ./Configure -install
 +> cp /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​.config/​bin/​Linux-g++/​env.csh /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01/​env.csh ​
 +</​code>​
 +The script for the environnement variables for geant is located at:
 +<​code>​
 +$G4INSTALL/​.config/​bin/​Linux-g++/​env.csh
 +ou 
 +$G4INSTALL/​.config/​bin/​Linux-g++/​env.sh
 +</​code>​
 +=====  GATE installation ​ =====
 +
 +Edit the file /​usr/​local/​gate/​gate_v3.1.2/​gate_v3.1.2/​env_gate.csh and add the following lines at the beginning:
 +<​code>​
 +setenv G4VERSION 9.0
 +setenv G4INSTALL ​ /​usr/​local/​gate/​gate_v3.1.2/​geant4.9.0.p01
 +setenv LMF_HOME /​usr/​local/​gate/​gate_v3.1.2/​lmf_v3.0
 +setenv LD_LIBRARY_PATH /​usr/​local/​gate/​gate_v3.1.2/​root_v5.14.00h/​lib:/​usr/​local/​gate/​gate_v3.1.2/​CLHEP-2.0.2.3/​lib:/​usr/​local/​gate/​gate_v3.1.2/​gate_v3.1.2/​tmp/​Linux-g++/​Gate:​${LD_LIBRARY_PATH}
 +setenv PATH /​usr/​local/​gate/​gate_v3.1.2/​root_v5.14.00h/​bin:/​usr/​local/​gate/​gate_v3.1.2/​gate_v3.1.2/​bin/​Linux-g++:​${PATH}
 +setenv GATEHOME /​usr/​local/​gate/​gate_v3.1.2/​gate_v3.1.2
 +setenv ROOTSYS /​usr/​local/​gate/​gate_v3.1.2/​root_v5.14.00h/​root
 +</​code>​
 +Continue intallation
 +<​code>​
 +> cd /​usr/​local/​gate/​gate_v3.1.2/​gate_v3.1.2
 +> source /​usr/​local/​gate/​gate_v3.1.2/​gate_v3.1.2/​env_gate.csh ​
 +> gmake
 +</​code>​
 +Edit the file /​usr/​local/​gate/​gate_v3.1.2/​gate_v3.1.2/​env_gate.csh and add the following lines at the beginning:
 +<​code>​
 +setenv ECAT7_HOME /​usr/​local/​gate/​gate_v3.1.2/​ECAT
 +</​code>​
 +Job splitter installation
 +<​code>​
 +> cd /​usr/​local/​gate/​gate_v3.1.2/​gate_v3.1.2/​Cluster_Tools/​jobsplitter
 +> gmake
 +</​code>​
 +File merger installation
 +<​code>​
 +> cd /​usr/​local/​gate/​gate_v3.1.2/​gate_v3.1.2/​Cluster_Tools/​filemerger
 +> gmake
 +</​code>​
 +=====  Running Gate  =====
 +
 +For running Gate:
 +<​code>​
 +> source /​usr/​local/​gate/​gate_v3.1.2/​gate_v3.1.2/​env_gate.csh
 +> Gate
 +</​code>​
 +
  
  • en/soft_installation_de_gate_3.1.2_installation_sous_sl4_32_ou_64_bits.txt
  • Last modified: 2016/12/16 10:16
  • (external edit)